PH-456
OUTSIDE HANDLES
| Product Code | Note | ||
|---|---|---|---|
| PH-456-KA | OUTSIDE HANDLES | Door thickness : 1〜3.2mm |
| Materials | Zinc-Alloy Die-Casting(ZDC) |
|---|---|
| Finish | Satined Chrome Plating with Lacquer |
| Usage examples | Control panels, Operator panels, Server rack |
| Operating instructions | The handle slightly pops out by unlocking with a key. Then take out a key and pull up the handle to open the door. The door is automatically locked when you return the handle. |
| Attention | ◇Only K/A available. |
| Key No. | Key No.G200 with 1 key. |
| Explanation | Compatible with: outside handles(PH-445,PH-447D, PH-448D, PH-449, PH-450, PH-456) ※It can be installed to a thin board t=0.8mm with 4pcs of M3 screws. |
Features
-
・Left/right hand use.
・2 positon locking. Enable to enhance the air tightness with the stickle shaped cam on the top and bottom.
・Smooth handle operation with a single action. The door opens by just pulling up the handle and the cam catches by just pushing it down.
・Toggle locking mechanism with roller.
・Handle can keep its position when it is pulled up/pushed down.
・When the red color sticker apperes in inside, shows unlocking.